Swing Gate Motor Installation & Replacement — Brisbane, Logan & Gold Coast
Merlin & Centsys Automation Specialists
Expert swing gate motor installation and replacement for residential and acreage properties. Merlin and Centsys specialists. Professional mounting, safety checks and full commissioning.
Up to 3-year manufacturer warranty (plus 12-month workmanship warranty).
Backed by our own service team — we service, maintain and support your automation 24/7.
Is your gate suitable for automation? Quick checklist:
If you're unsure, no problem — we'll assess everything during a free site visit.
What Is a Swing Gate Motor?
A swing gate motor automates a hinged gate so it opens and closes at the press of a remote, keypad or phone app. Unlike sliding gates that run along a track, swing gates pivot on hinges — either as a single leaf or a pair. Automating a swing gate gives you hands-free access, better security, and a cleaner look at the front of your property.
Because swing gates move on an arc, the geometry matters — hinge position, gate length, ground slope and opening angle all affect how the motor needs to be mounted and set up. That's why swing gate automation is often more installation-sensitive than a sliding gate operator.
As Merlin and Centsys automation specialists, we match the right swing gate opener to your gate's weight, width, wind exposure and layout. Whether you need a standard arm motor, an underground unit, or a solar-powered setup, we recommend what suits the job — not what costs the most.
Swing Gate Motor Installation — What's Included
Every swing gate motor installation follows the same process. We start with a site inspection to confirm your gate is suitable for automation and to check the geometry (hinge position, opening angle, slope and clearances). Then we supply and mount a Merlin or Centsys motor matched to the gate weight, layout and wind exposure. Force and limit settings are dialled in to prevent damage and ensure smooth operation. Safety devices are installed where required, remotes are paired, and we walk you through operation before we leave. Typical installation takes 2–4 hours.
If you want smart control, we can also set you up with Wi‑Fi / Bluetooth connectivity (where supported) so you can control and monitor your gate from your phone.
Ongoing Service & Support
We don't just install your swing gate automation and disappear. We service and maintain the systems we install, backed by our own internal team. If your gate needs attention after hours, we offer 24/7 emergency call-out for existing customers — because automation failures don't always happen during business hours.
Not sure what you need? Book a free assessment and we'll recommend the right setup.
Watch: Merlin L300 Dual Swing Install
Low-voltage Merlin L300 dual swing gate automation — installed by Into Action in Brisbane
Swing Gate Motor Replacement
If your swing gate motor is struggling — slow to respond, making noise, or has stopped working altogether — it may be time for a replacement. Common causes include age, storm damage, water ingress, or simply reaching end-of-life after years of daily use.
Sometimes it's not the motor — it's the setup. Gates that open or close by themselves, don't respond the way they should, or struggle in windy conditions are often caused by misaligned safety beams, ground obstructions, or undersized automation. Many installers cut costs by fitting a motor that's too small for the gate weight or wind exposure — it works fine at first, but fails under real-world use. We size every installation to handle your gate properly, so you don't face this problem down the track.
Upgrading to a current Merlin or Centsys motor gives you better reliability, quieter operation, and compatibility with modern remotes, keypads and smartphone connectivity. We remove the old motor, mount and wire the new unit, set force and limits, pair your remotes, and test everything before handover.
Not sure if you need a repair or a full replacement? We'll give you an honest assessment. See our service & repairs page for diagnostics and troubleshooting.
Swing gate motor installation in progress — Centsys Vantage 500
Swing gate automation in action
Real swing gate job — Into Action Automation
Gate not working or motor getting old?
Call now and we’ll tell you if it’s a repair or replacement — and what it’ll cost.
What we need to quote:
Swing Gate Automation — Why Upgrade?
Automating your swing gate isn't just about convenience — it's a genuine upgrade to your property's security, accessibility and street appeal. With a Merlin or Centsys system you get remote-controlled access, optional keypad or intercom entry, and safety features like auto-reverse and infrared safety beams.
You can also add auto-close (so the gate closes itself after a set time), plus smart control options depending on the setup. Solar options make automation possible on rural or off-grid properties where mains power isn't available.
And with up to a 3-year manufacturer warranty (model dependent), you get long-term reliability backed by proven automation brands — installed and commissioned properly.
Add keypads, safety beams & smart control
Explore optional extras: keypads, safety beams & myQ kits to upgrade your swing gate automation.
Swing Gate Motor Installation Cost (Price Guide)
Below is a guide only to typical swing gate motor supply + installation pricing. The final price depends on your gate, power options, site conditions, and the safety/access control equipment required. We’ll confirm the right setup after a quick site check.
Merlin Single Swing L300 (240V plug-in)
Centsys Vantage 400 Single Swing (240V plug-in)
Rural solar swing gate setups (minimal-use farm gates)
Example options: Merlin Solar Rural LR500 or Kenner Solar Rural
Dual swing gates: typically higher than single-leaf setups — quoted after a site check.
Heavy-duty commercial setups
For heavy-duty commercial sites (high traffic, shared driveways, strict safety requirements), swing gate automation systems can exceed $10,000+ depending on duty cycle, access control, and safety compliance.
All prices are supply + install, inc. GST, and assume a standard install (no major gate repairs or civil work).
What affects the cost?
If you tell us your suburb and send a couple of photos of the gate (or we can inspect on-site), we’ll recommend the right system and give you a clear, upfront quote.
Gate not working or motor getting old?
Call now and we’ll tell you if it’s a repair or replacement — and what it’ll cost.
What we need to quote:
Swing Gate Motor Installation in Brisbane
We install swing gate motors across Brisbane's southside — from established suburbs like Mansfield and Tarragindi with steep blocks and heavy timber gates, through to newer estates in Rochedale and Parkinson. South East Queensland's storm season means surge protection and sealed cabling are standard on every install. Hilly terrain and clay soils in suburbs like Mount Gravatt and Moorooka require careful post alignment and motor sizing.
Merlin LR500 single swing motor — Moorooka, Brisbane
Swing Gate Motor Installation in Logan
Logan's mix of rural acreage and suburban estates makes it one of our busiest service areas for swing gate automation. Properties in South Maclean, Jimboomba and Logan Village often have long driveways and heavy farm-style gates — ideal for Merlin's heavy-duty swing motors or solar-powered setups where mains power isn't available. Urban suburbs like Marsden and Springwood typically have lighter residential gates suited to standard arm motors.
Swing Gate Motor Installation on the Gold Coast
Gold Coast properties can bring a few extra variables — coastal air, higher wind exposure, and a mix of residential, strata and commercial sites. We install and replace swing gate motors across the Gold Coast and set the system up properly for the gate's size, usage and environment, with the right safety devices and access control options where required.
Hinterland properties in Mudgeeraba, Tallebudgera and Bonogin often need solar-powered swing gate automation for gates on remote driveways where mains power isn't practical. For rural and farm-style swing gates, a Merlin LR500 paired with a Merlin solar setup is a strong option for value and long-term reliability — a proven combination when you want quality without paying “boutique” prices.
We also handle strata, high-rise and commercial swing gate setups, including shared driveways and controlled entry (keypads, intercoms and safety beams). Suburbs like Nerang, Robina and Highland Park are well within our regular service area.
Solar Swing Gate Motors
If your property doesn't have mains power at the gate, a solar-powered swing gate motor is the practical solution. Merlin solar kits pair a panel with a battery backup system, so your gate operates reliably even through overcast days and overnight.
Solar setups are popular on rural and acreage properties across Logan and the Gold Coast hinterland, where running mains cable to the gate would be expensive or impractical. We size the solar panel and battery to match your gate's weight and daily cycle count, so you get consistent performance year-round.
Swing Gate Motor Repair & Troubleshooting
Common swing gate motor issues include the gate not opening or closing fully, slow response times, remotes not pairing, and unusual noises during operation. These can be caused by worn gears, water damage to the control board, misaligned safety beams, or simply incorrect limit settings.
In many cases a repair is the better option — replacing a control board or resetting limits is far cheaper than a full motor swap. But if the motor is old, discontinued, or has multiple faults, a replacement with a current Merlin unit is usually the smarter long-term move. We'll give you an honest recommendation either way.
Pricing & Call-Out Information
Assessment & Quote
We don't charge a call-out fee. When you book a service visit, we come out to assess your gate and provide a quote — there's no charge for that visit.
You only pay for labour and parts if you proceed with the work. Labour is charged at $125/hr (inc GST) for residential work, with a minimum 30-minute charge. Parts are quoted separately based on what's needed.
If you're not sure whether you need a repair or a full replacement, book a free assessment and we'll give you an honest recommendation.
Service call-out rates (scheduled servicing & maintenance)
Residential
$225 inc GST
First 30 minutes onsite
Commercial / Strata
$295 inc GST
First 30 minutes onsite
Additional time: $150/hr inc GST (billed in 15-minute increments). Parts are additional if required. Prepayment required for service bookings.
After-hours emergency call-out
$599 inc GST
Includes up to the first 30 minutes onsite. Then $250/hr inc GST. Mon–Fri 5pm–7am; Sat 4pm–Mon 7am. Subject to availability and service area.
Why Choose Into Action Automation for Swing Gate Installation?
We’re Merlin and Centsys specialists. We know the product range inside out and match the right motor to your gate — not the most expensive one.
You also get warranty you can trust: 12-month workmanship warranty on every install, plus up to a 3-year manufacturer warranty (model dependent).
Specialist focus
We install gate and garage door motors — that's it. No fencing, no landscaping, no generalist trade work. Sharper expertise, tidier installs.
Merlin & Centsys experts
We’re Merlin and Centsys specialists. We know the product range inside out and match the right motor to your gate — not the most expensive one.
Honest, transparent advice
If a repair makes more sense than a replacement, we’ll tell you. If your gate isn’t suitable for automation, we’ll say so upfront.
Warranty you can trust
12-month workmanship warranty on every install, plus up to a 3-year manufacturer warranty (model dependent).
Backed by our own service team 24/7
Your installation is backed by our internal service team. We service and maintain what we install, and 24/7 emergency call-out is available for existing customers.
Merlin A200 out-swing motor — Brisbane
Swing gate motor install — real job
Into Action Automation
Replacing an Old Gate Motor?
Replacing an older swing gate motor is one of the most common jobs we do — especially when the original system is outdated, parts are hard to source, or the setup was undersized from day one.
We specialise in Merlin and Centsys installations, but we’re experienced with most major automation brands, including Mhouse, Kenner, Nice, BFT, Ditec, ATA, CAME, FAAC and more. If you’re replacing an existing system, we’ll assess what you’ve got, explain your options clearly, and recommend the right setup for your gate and budget — not just what’s sitting on a shelf.
If you’re not sure whether you need a repair, a re‑set/adjustment, or a full replacement, book a free assessment and quote.
Replace / upgrade questions we get all the time
Gate not working or motor getting old?
Call now and we’ll tell you if it’s a repair or replacement — and what it’ll cost.
Gate not working or motor getting old?
Call now and we’ll tell you if it’s a repair or replacement — and what it’ll cost.
Frequently Asked Questions
Looking for Something Else?
Ready to Install Your Swing Gate Motor?
Get a fast, honest quote from a Merlin & Centsys specialist. We service Brisbane, Logan and the Gold Coast — call us or send through your details online.